• Digital input & relay output
• Dual totalizer & rate metering
• Multiple alarm functions
• LWAN operation/reporting
• Easy Programming
• CE Certifed

The 500 Series is a microcomputer-based instrument incorporating a digital input, as well as a relay output.  This instrument was designed for remote applications where a local display is not required, but process data can be communicated to one of Florite’s software programs or to any data acquisition program for data analysis and/or storage purposes.  Other 500 Series features include rate metering, dual totalizing, multiple audio/visual alarm functions, a serial RS-232 port, and LWAN (modem) communication capabilities.

The 500 Series have been designed to provide unattended precision liquid and gas flow measurement, value monitoring, data communication, and process control for a variety of commercial and industrial applications.

Input signals are accepted from digital output transducers, and a relay output option is available.

Programmable set-points include quantity, high/low/average flow rates, time in service and are used to trigger the indicators, signal output, and invoke local and remote alarm reporting.

Information is accessed locally using the display, standard RS-232 serial port, or remotely using the internal or external WAN (modem) interface.

The 500 Series non-volatile memory retains accumulated and programmed information over 100 years without a backup battery, a long life lithium battery preserves clock time over 10 years.

• Quantities to 99,999,999.99
• Rate to 9,999,999.99
• Service Time to 9999 hrs
• Real Clock Time
• Input Frequency Above 10KHz

• Quantity Limits to 99,999,999.99
• Rate Limits to 9,999,999.99
• Services Time Limit to 9999
• Digital Constant to 999,999
• Rate Time Base and Measure Units
• Clock and Report Time Values
• Network Operating Values